Lakewood Model 3175 conductivity controller

Boiler · Cooling tower · Condensate

Model 3175e conductivity controller for boilers and cooling towers

Touchscreen conductivity controller for boilers and cooling towers, with the menu water treaters already know from the 1575e.

  • 7 incolor capacitive touchscreen
  • 4 + 1relays: four selectable, one blowdown
  • 2water meter inputs
  • 50-10,000 µSconductivity range

95% of Lakewood products ship within 2 days of your order.

Accurate conductivity control with a touchscreen

The Model 3175e conductivity controller is designed to provide accurate, reliable control of water chemistry for both boilers and cooling towers. Its fast, responsive 7-inch touchscreen makes setup quicker than a keypad.

We kept the familiar navigation and configuration from the Model 1575e, 140, and 150 controllers that water treaters know. Configure it for cooling tower, boiler, or condensate applications with the appropriate conductivity sensor, set relays for setpoint control, water meter, percent of blowdown or percent of time, and schedule up to 12 feeds. A standard secondary input may be used to control ORP or pH.

  • Reliable circuitry that has been proven for two decades to accurately control your water chemistry.
  • User-selected relay options for a high level of application flexibility.
  • The same menu interface as the 1575e, so there is nothing new to learn.

Specifications

Model 3175e specifications
Model3175e
Conductivity range50-10,000 µS
Conductivity sensor2 electrode
Conductivity resolution±10 µS (conductivity below 5000 µS) / ±100 µS (conductivity above 5000 µS)
Temperature compensation500 NTC, none
Accuracy and repeatability±1.0%
Deadband / setpointProgrammable
Auto / manual outputsMenu selectable
Interface7 inch capacitive touchscreen
Drum switch inputs2 digital contact inputs
Water meter inputs (2)Contact head, paddle wheel, or turbine
TimersMax. blowdown time exceeded and relay run time exceeded
Output signal (1)4-20 mA, isolated or non-isolated optionally powered output for conductivity
Input signal (1)4-20 mA, non-isolated internally powered input for conductivity
Output relays5: 4 selectable use, 1 blowdown
Relay ratings3A each, 10A total
Power120/240 VAC 50/60 Hz
Ambient32° to 120°F (0° to 49°C)
pH or ORP sensorSolution ground, single ended, or signal differential
pH or ORP resolution0.01 pH, 1 mV for ORP

Features

  • 7-inch color touchscreen display.
  • Scheduled feed, which can use four relays for biocides or other chemicals.
  • Five output relays: one typically used for bleed/blowdown, plus four chemical feeds.
  • Two water meter inputs, two drum switch inputs, one conductivity input, one flow switch input, one 4-20 mA input and one 4-20 mA output.
  • The 4-20 mA input can be used with a transmitter for one of the following: remote conductivity, makeup conductivity, pH, ORP, percent, pressure, milliamps, flow rates, or traced chemistry control. This transmitter can be added in the field.
  • Removable power cord and receptacles for conduit installations. Enclosure is rated NEMA 4X.
  • Single circuit board for high reliability and lower cost.
  • Large shallow enclosure for easy wiring.
  • Ball valve delay feature allows accurate control of motorized ball valves.
  • Onboard selector switch for 120 or 240 VAC power.
  • Indicators for power, alarm, and relay status.

Downloads

The 3175e cut sheet and manual are being updated. Call 800-228-0839 for a copy.

Where to buy

Get the Model 3175e from a Lakewood partner

Your partner quotes, configures and supports the controller on site. Questions about a Model 3175e you already own? Call 800-228-0839, Mon to Fri, 7:30 am to 4:30 pm Central.

Browse every partner A to Z